Electric Breakers

The Hilti TE 1000-AVR 110v demolition breaker is designed for demolition and chiselling floors and walls. Ideally suited for building and construction environments where breaking concrete, masonry, stone and asphalt is required.

The Vibration Damped Breaker has up to 50% less vibration than conventional models in its range which reduces user fatigue along with making it versatile and easy to use with and Impressive Breaking depth of 125mm and Chisels up to 1.3m3 of masonry per minute.

Ask for extra chisels if working on a large area 

Note Additional chisel and points sharpening costs may apply

 Voltage                                      110V 

Power                                          1600W 

Single Impact                            22J 

Hammering Frequency         1950 impacts per minute 

Vibration Rate                           6.5m/s2 

Active Vibration Reduction   Yes 

Reduced Impact Energy        Yes

Weight                                         12.5kg

£POA

The Hilti TE 3000 AVR Heavy Duty Breaker brings impressive hammering power to big concrete demolition jobs. This breaker is very versatile and can be used for breaking up concrete and asphalt. This breaker is very easy to transport and is ready for use in minutes.

Ask for extra chisels if working on a large area 

Note  Additional chisel and points sharpening costs may apply

Voltage                                         110V 

Power                                            1760W 

Single Impact                             68J 

Hammering Frequency           860 impacts per minute 

Vibration Rate                             7 m/s² 

Active Vibration Reduction     Yes 

Reduced Impact Energy         No 

Supply Cord Length                  5m

Weight                                          29.9kg

£POA

The JCB Beaver Hydraulic Power Pack is very powerful and robust whilst remaining lightweight. Designed with a cast steel construction for strength, and High reliability, along with a powerful motor and its hydraulic flow capabilities it is the perfect option for the hydraulic breaker range. 

The beaver powerpack can be coupled with either our HM25 gun or HM25LV guns. Both these guns operate the same and have the same breaking capabilities with the only real differences being that the HM25LV breaker gives the ultimate in terms of performance and low hand arm vibration levels. The Ultra low vibration system reduces hand-arm vibration by 60% down to 1.6m/s2. The HM25LV also has lower handles than the standard HM25 breaker making it more compact, easier to use and easier to transport. 

Ask for extra chisels if working on a large area 

Note  Additional chisel and points sharpening costs may apply

Powerpack Beaver 

Engine                                        Recoil Start/Four stroke 

Fuel                                             Unleaded Petrol

Fuel Tank                                   6litres

Engine Power                           8hp 

Hydraulic hose length            7metres

Hydraulic Flow litres/min       0-20 

Hydraulic Oil Capacity             5 litres

Max Pressure Bar (psi)             138 (2000) 

Height                                          615mm

Width                                           530mm

Width                                           720mm

weight                                         66kg

 Breaker HM25

Hammering Frequency           1500 blows per minute  

Vibration Rate                             4m/s2

Hydraulic Flow litres/min         18-22 

Max Pressure Bar (psi)              90-110Bar (1305-1595 PSI)

Weight                                          26kg

 Breaker HM25LV

Hammering Frequency           1500 blows per minute  

Vibration Rate                             1.6m/s2

Hydraulic Flow litres/min         18-22 

Max Pressure Bar (psi)              90-110Bar (1305-1595 PSI)

Weight                                           27kg

£POA

The Atlas Copco TEX05PE hand held pneumatic breaker is designed for light demolition and construction work where it can be used effectively on concrete and asphalt. this lightweight breaker is also ideal for surface preparation, electrical installation and general demolition. Its light weight design makes it suitable for use on walls, floors and over head if required.

Ask for extra chisels if working on a large area  Note Additional chisel and points sharpening costs may apply

Air Consumption       24 cfm 

Impact Rate                2640 bpm

Length                         450mm

Vibration Level           5.6 m/s² 

Noise Level                  101 dBA 

Weight                         6.5 kg

£POA

The Atlas Copco TEX09PE hand held pneumatic breaker is designed for light demolition and construction work where it can be used effectively on concrete and asphalt. Its light weight design makes it suitable for use on walls, floors and over head if required.

Ask for extra chisels if working on a large area  Note Additional chisel and points sharpening costs may apply

Air Consumption      36 cfm

impact rate                 1800 bpm 

length                          560mm

Vibration Level          4.2 m/s² 

Noise Level                 105 dBA 

Weight                         10.5 kg

£POA